Original FWD Atto 3 replacement parts
BYD Atto 3 Original vs EVO & Market Identification
Identify an Atto 3 from its production label, original sales market and drive layout before building the parts list.
Vehicle and market boundaries
| Vehicle record | Context | Selection boundary |
|---|---|---|
| Original ATTO 3 | Front-wheel-drive electric SUV | Keep production date, original sales market and drive-unit identification together. Registration year alone is not an interchange boundary. |
| Regional Yuan Plus records | Catalog names can overlap with original ATTO 3 | Confirm the actual assembly code and equipment. A regional model alias does not prove lamp, steering, sensor or trim interchange. |
| ATTO 3 EVO | 2026 introduction with rear-wheel-drive or all-wheel-drive versions | Treat as a separate application: drive layout, rear suspension and front/rear body equipment changed. Do not carry original FWD references across automatically. |
| Steering and traffic market | LHD/RHD and destination lighting specification | Record steering side separately from headlamp beam requirements, mirror equipment, HVAC packaging and wiper arrangement. |
Start with the original vehicle record
Keep the complete model designation rather than relying on registration year or a rear badge. A vehicle imported from another market retains its original equipment requirements.
Separate original FWD from EVO
The original ATTO 3 uses front-wheel drive; the ATTO 3 EVO introduced in 2026 has rear-wheel-drive and all-wheel-drive versions. Its rear suspension and bumper equipment also changed. Shared vehicle dimensions or a familiar name do not establish common shafts, carriers, mounts or collision panels.
Resolve Yuan Plus catalog references
Some replacement catalogs group Yuan Plus and Atto 3. Use that relationship as a lookup starting point, not a blanket interchange statement. Ask for the installed label and compare the full code including its suffix, mounting interfaces and equipment before approving an order line.
Keep traffic and steering requirements separate
Record LHD or RHD for steering, HVAC and wiper packaging, and separately identify the headlamp traffic-market approval. Mirrors may have different cameras, folding or heating equipment. A trim badge or connector pin count cannot replace those function checks.
Build one record per assembly
Send an overall vehicle photo and component label, then add connection and mounting views specific to each part. Mark unconfirmed measurements and keep EVO inquiries separate until their own catalog application is established. The original FWD component selection below is not an EVO interchange list.
Connected assembly checks
Keep the original drive-unit identification with the CV Axle and Drive Unit Mount; confirm their mounting relationship to the Subframe.
Match the Headlights, Front Bumper and Front Lower Grille to the same original front-end design.
Components to identify separately
| Assembly | Selection evidence |
|---|---|
| Headlights | Side, beam market, LED modules, connector and front-end version |
| Front Bumper | Original front-end version, parking openings, trim and mounting points |
| Rear Bumper | Facelift, parking sensor openings, reflectors and lower valance |
| Steering Rack | LHD or RHD, electric-assist arrangement, mounts and supplied electronics |
| CV Axle | Original FWD drive unit, side, shaft length, splines and joint interfaces |
| Subframe | Front or rear carrier, suspension brackets and mounting datums |
| Side Mirror | Side, LHD or RHD, folding, heater, camera and connector |
Continue the parts list
Return to the Atto 3 system directory for other assemblies. Use the OE and VIN checklist for missing identification and the quotation guide for commercial and freight records.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.