Kia Cerato replacement parts
Kia Cerato Cooling & Climate Circuits
Cerato engine cooling, turbo charge air, lubricating oil, gearbox fluid and cabin A/C are separate circuits.
Name the circuit before the heat exchanger
Identify the fluid and attached equipment on each line. A similar core shape does not establish matching ports, working conditions or mounting points.
Compare MPI and GT front-end equipment
A naturally aspirated MPI cooling package must not be assumed to match a GT turbo application. Record the radiator connections, fan controller, condenser mounts and any charge-air hardware separately. Manual, automatic, IVT and DCT gearbox identity can also affect nearby brackets or cooler provisions.
Keep the A/C Evaporator refrigerant connections separate from the Heater Core coolant pipes when preparing HVAC orders.
Keep HVAC case and steering market together
The evaporator carries refrigerant while the heater core carries coolant. Identify the HVAC case, steering side and pipe orientation before approving either core. Blower wheel, motor connection and controller requirements remain a separate electrical check.
Define pump and compressor contents
For a water pump, compare drive arrangement, mounting face and impeller clearance. For an A/C compressor, record refrigerant, pulley and control interface from the installed unit. Agree seals, valves and brackets explicitly, and keep open ports protected throughout sample inspection and packing.
Components to identify separately
| Assembly | Selection evidence |
|---|---|
| Water Pump | Engine code, impeller clearance, drive arrangement and mounting face |
| Radiator | Engine cooling core, hose ports and transmission-cooler connections |
| Thermostat | Coolant circuit, opening specification and integrated housing |
| Radiator Cooling Fan | Shroud footprint, control module, connector and motor arrangement |
| Oil Cooler | Engine oil versus transmission fluid circuit, ports and mounting |
| Coolant Reservoir | Pressurized tank versus overflow bottle and coolant circuit |
| A/C Compressor | Belt-driven compressor, refrigerant, pulley and control-valve interface |
| A/C Condenser | Front-end dimensions, receiver-drier and refrigerant fittings |
| A/C Evaporator | HVAC case, pipe orientation and expansion-valve interface |
| Blower Motor | LHD or RHD HVAC housing, blower wheel and control connection |
| Heater Core | Cabin heater matrix, pipe spacing and coolant connections |
Continue your parts list
Return to the Cerato parts directory for other systems. The OE and VIN checklist covers missing identification, while the quotation guide covers commercial and freight information.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.