Record LC100, LC200, LC300 or Prado series, facelift, side, grade, market and installed safety equipment.
Body, Lighting, Exterior & Interior
Toyota Land Cruiser Rear Bumper Wholesale Supplier
Rear bumper cover by body configuration and equipment. For quotation, confirm series / year / facelift and side / lhd / rhd with quantity and packing.
Fitment boundary: Confirm Land Cruiser series, facelift, body configuration, grade, side and destination market. full-size Land Cruiser or Prado body, facelift, sensors, reflector/trim openings, lower valance and packing scope must match.
Product definition
Define the correct Land Cruiser rear bumper before price.
Record the four fields below on the same inquiry line.
Series / year / facelift
Support this with a label, measurement or photo where relevant.Side / LHD / RHD
Support this with a label, measurement or photo where relevant.Grade / sensors / openings
Support this with a label, measurement or photo where relevant.Vehicle / old-part photos
Support this with a label, measurement or photo where relevant.
Support this with a label, measurement or photo where relevant.Side / LHD / RHD
Support this with a label, measurement or photo where relevant.Grade / sensors / openings
Support this with a label, measurement or photo where relevant.Vehicle / old-part photos
Support this with a label, measurement or photo where relevant.
Rear Bumper purchasing boundary
Review the installed rear bumper as its own specification.
For this Land Cruiser rear bumper, begin with series / year / facelift. Then verify side / lhd / rhd and grade / sensors / openings against the removed unit. Confirm Land Cruiser series, facelift, body configuration, grade, side and destination market. full-size Land Cruiser or Prado body, facelift, sensors, reflector/trim openings, lower valance and packing scope must match. Record every unresolved interface beside the offered rear bumper item code so sample approval and production follow the same application.
Series and market fitment
Check this rear bumper against the exact Land Cruiser family.
The Land Cruiser name spans different chassis and regional specifications. Start with series / year / facelift; then verify side / lhd / rhd and compare the removed component.
| Vehicle family | Required check |
|---|---|
| LC100 / 100 Series | Confirm chassis, build month, engine, axle or installed position and older-system interfaces. |
| LC200 / 200 Series | Confirm pre-facelift/facelift, engine, grade, market and standard or AHC/KDSS equipment. |
| LC300 / 300 Series | Confirm engine, transmission, grade, ADAS/electronic equipment, label and production revision. |
| Land Cruiser Prado | State Prado 90/120/150/250 or chassis code; do not infer interchange with the full-size series. |
Identification evidence
An OE number helps, but it is not mandatory.
Send the exact vehicle record, installed position, old-part label, complete photos and decisive measurements. The catalog-style image identifies only the product type and never proves fitment.
Wrong-part prevention
Build a defensible rear bumper inquiry.
Compare complete vehicle-corner photos, mounting tabs, adjoining panels, lamp/camera connectors, beam market and finish.
Compare series / year / facelift, side / lhd / rhd, grade / sensors / openings, vehicle / old-part photos and attach the label, complete views and decisive measurements for this rear bumper.
Define bare versus complete scope, fragile tabs, finish, nesting limits, support frame and carton dimensions. Approve the exact rear bumper and unresolved boundaries before production.
Related Land Cruiser requirements
Complete the vehicle-specific parts list.
All Toyota Land Cruiser PartsCompare all 93 parts by vehicle system.Land Cruiser Body, Lighting, ADAS & Packing GuideResolve the relevant vehicle or system boundary.Land Cruiser Front BumperFront bumper cover by body, trim and installed equipment.Land Cruiser Front GrilleUpper or lower grille by front-end design.Land Cruiser HeadlightsComplete headlamp or housing by side and lighting system.Land Cruiser Tail LightsRear lamp assembly by body configuration, side and facelift.
Buyer questions
Toyota Land Cruiser Rear Bumper FAQ.
Yes. Send LC100, LC200, LC300 or the exact Prado series, chassis context, installed position, old-part photos and measurements. Confirm Land Cruiser series, facelift, body configuration, grade, side and destination market. full-size Land Cruiser or Prado body, facelift, sensors, reflector/trim openings, lower valance and packing scope must match.
Confirm series / year / facelift, side / lhd / rhd, grade / sensors / openings, vehicle / old-part photos. Keep unresolved differences visible before approval.
Yes. Put the rear bumper application, position, evidence file, quantity, grade and packing request on one traceable line.
Bulk inquiry
Send your OE list, model list or sample photos.
We quote by vehicle model, OE number, part type, quantity and target market. Uploading a spreadsheet or ZIP package is optional.
1Send OE list, model list or part photos
2Confirm fitment by OE number or sample
3Quote by quantity, packing and market
Sales contact
Email: sales@popxa.com
Phone: +86 188 3743 1505
WhatsApp: +86 188 3743 1505
WeChat: +86 188 3743 1505
Address: Jinling Avenue, Yanling, Xuchang, Henan, China
Common wholesale inquiry scope
- Toyota, Honda, Nissan, Hyundai, Kia, BYD and Chery replacement parts
- Brake pads, filters, lights, suspension, sensors and body parts
- Mixed OE orders, neutral packing and private label requests
Quote faster with these details
- Vehicle brand, model, model year and engine version
- OE No., replacement number, reference number or sample photo
- Target quantity, destination market and packing request
- Preferred product grade, private label or neutral packing