BYD Seal electric sedan
BYD Seal EV Service Parts Order Guide
A Seal electric-sedan service order centres on scheduled or inspected items, not an engine-service bundle.
Build the service list from the vehicle schedule
Use the correct market service schedule and workshop findings to determine quantities. Combustion-engine oil, intake, ignition and exhaust parts are not fitted to this battery-electric sedan.
Choose the cabin filter by the installed tray
Record the removed element dimensions, seal profile and airflow orientation. Agree particulate or carbon media separately from the fitment check. A product listing carrying several BYD names is useful for a lookup but does not eliminate the tray comparison.
Separate tire service from sensor compatibility
Keep the old TPMS label and valve hardware with the original market record. Establish protocol and configuration requirements before choosing a replacement set. Confirm relearn requirements with the repairer rather than assuming every black sensor can be programmed for the car.
Order brakes from measured inspection findings
Keep the axle, caliper, pad shape and rotor dimensions on the service sheet. Low use of friction braking does not prove corrosion-free rotors or acceptable pads. Order the diagnosed parts and agreed hardware instead of automatically quoting an entire axle assembly.
Match the front washing and sweep system
Identify the front linkage and steering-market sweep arrangement. Separate a bare washer bottle from a bottle supplied with motor, and check the pump outlet and grommet. Do not transfer a hatchback rear-wiper or dual-outlet washer assumption to the Seal sedan.
Keep repair-only components off routine kits
A failed pump, blower or parking sensor needs its own diagnosis and assembly identity. Add those repair lines only when required; keep high-voltage equipment outside an ordinary service-parts order unless handling and supply arrangements have been separately established.
Related selection checks
For a cabin airflow complaint, identify the cabin air filter restriction separately from the blower motor and blower control module; compare the HVAC housing before ordering an A/C evaporator.
At the same wheel, match brake pads to the installed brake caliper, measure brake discs, and retain the correct brake hose routing. These checks define separate supply lines, not an automatic replacement kit.
Keep front sweep identification for the wiper motor & linkage separate from washer delivery: compare the washer pump socket and outlet with the washer reservoir contents.
Components to identify separately
| Assembly | Selection record |
|---|---|
| Cabin Air Filter | Filter length, width, frame depth and perimeter seal |
| Brake Pads | Axle, installed caliper, backing plate and friction grade |
| Brake Discs | Axle, diameter, thickness, overall height and hub interface |
| TPMS Sensor | Original market, sensor marking, radio protocol and valve |
| Blower Motor | Air-box opening, cage depth, rotation and electrical socket |
| Blower Control Module | Installed marking, heat sink, flange and power connector |
| Wiper Motor & Linkage | Front sweep mechanism, LHD/RHD, pivots and motor plug |
| Washer Pump | Tank socket, outlet arrangement, seal and electrical plug |
| Washer Reservoir | Tank contour, filler route, pump recess and level-sensor provision |
Continue the order
Return to the Seal system directory. For commercial information, use the parts-list quotation guide; keep vehicle-specific identification with each requested assembly.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.