Chery Tiggo 4 / Pro • Petrol and HEV identified separately
Chery Tiggo 4 Facelift, Body & Door Selection
A Tiggo 4 collision inquiry should retain front, rear and side photographs, production label and original market.
Identify the actual fascia before individual panels
Pro and later hybrid revisions can change panel edges, lamp geometry and mounting. A registration year or shared family name cannot approve every item in a mixed body order.
Distinguish front and rear covers
A front bumper needs grille, lamp and sensor openings identified. The rear cover needs reflector, lower insert and hatch-area comparison instead. Keep the long lower rear trim separate from the main skin, and do not use decorative outlet shapes to infer an exhaust system or front-end application.
Keep lamp sections and functions explicit
Headlamps need side, traffic-market beam, technology, socket and module contents. Outer rear lamps and hatch sections have separate positions. A fog lamp and daytime-running lamp are different functions; only request an independent fog assembly when the vehicle actually has it.
Record door mechanisms as related but separate items
A bare door shell, regulator, latch, handle and mirror need the same door/body identity but different selection fields. Glass carriers, keyless wiring, folding and camera equipment can change the order. A complete equipped-door quotation should itemize those contents rather than implying they come with a shell.
Treat the hatch as a distinct system
The tailgate shell must retain window, lamp, latch, wiper and support interfaces. Gas supports and powered lift devices are different contents. The rear wiper motor and latch cannot be selected from front-windscreen or side-door parts just because their electrical housings look similar.
Agree finish, equipment and freight together
Large panels and covers need finish, mounting protection and carton dimensions before freight comparison. Sensors and cameras need their actual system, bracket and calibration records. Small trims, seals and clips should be itemized with the identified parent assembly so a consolidated shipment does not mix revisions.
Connected selection questions
Compare headlights with the actual front bumper fascia.
The fender must preserve the same lamp-edge and wheel-arch revision.
Keep the hood / bonnet panel, latch arrangement and front bumper fascia matched to the same vehicle build.
Add separate fog lights only when that lamp function and bracket are fitted.
Keep the rear bumper cover separate from its rear bumper insert.
The tail lights sections retain their own body and connector records.
Assemblies to identify separately
| Assembly | Application | Selection record |
|---|---|---|
| Headlights | Exact front fascia, side and beam market | Build/facelift, LHD/RHD beam, lamp technology, sockets and modules |
| Tail Lights | Exact body revision and lamp section | Side, corner/hatch location, socket, function and mounting |
| Fog Lights | Only builds with the identified separate fog lamp | Side, lamp type, fascia bracket and connector |
| Front Bumper | Actual front cover and fascia revision | Facelift, grille interface, lamp/sensor openings and tabs |
| Rear Bumper | Actual rear cover and lower trim revision | Build, reflector/parking openings, lower insert and mounting |
| Rear Bumper Insert | Retained published route; exact lower rear trim | Moulded marking, clip pattern, outlet/reflector openings and cover |
| Side Mirror | Exact side, steering market and fitted functions | Socket pins, folding/heating, camera/indicator and mounting |
| Fender | Exact side and front-body revision | Lamp/bumper interfaces, trim openings and fixing pattern |
| Hood / Bonnet | Actual front-body and latch arrangement | Build, hinge/latch pickups, insulation and panel edges |
| Tailgate | Exact SUV hatch and equipment revision | Window, lamp, latch, wiper and support interfaces |
| Door Shell | Exact front/rear door and side | Body build, hinges, lock, glass frame and wiring apertures |
| Window Regulator | Exact door, side and glass mechanism | Rail pattern, cable path, glass mounts, motor and socket |
| Door Lock Actuator | Exact door latch and locking equipment | Door/side, cable ends, socket and keyless function |
| Door Handle | Exact exterior door and equipment | Side, key cylinder, keyless wiring, carrier and finish |
| Tailgate Lock Actuator | Installed rear hatch latch | Latch marking, socket, striker and release mechanism |
| Tailgate Support / Lift Strut | Actual gas support or confirmed powered hatch equipment | Length, end fittings, force marking and hatch configuration |
| Front Wiper Motor & Linkage | Actual windscreen mechanism and steering market | Motor socket, linkage pivots, mounting and sweep geometry |
| Rear Wiper Motor | Exact tailgate and rear wipe function | Output shaft, socket, mounting and washer arrangement |
| Washer Pump | Installed washer reservoir and outlet function | Pump seat, outlet count, socket and flow arrangement |
| Washer Reservoir | Exact front-body cavity and washer equipment | Bottle profile, filler neck, pump seats, sensor and mounts |
| Fender Liner | Exact wheel corner and body revision | Side, arch profile, clips, access openings and material |
| Underbody Shield | Identified lower engine/body panel location | Powertrain, mounting, service apertures and panel profile |
| Parking Sensor | Fitted ultrasonic parking system | Bumper position, complete marking, socket and bracket |
| Reversing Camera | Actual rear-view or surround-view equipment | Housing, socket, mounting and video-system identity |
Continue the order
Return to the Tiggo 4 grouped parts directory. For quantities and commercial fields, use parts-list quotation preparation rather than inferring price or stock from a reference number.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.