Tiggo 7 / Pro / Pro Max • Petrol, MHEV and PHEV identified separately
Chery Tiggo 7 Body, Facelift & Door Equipment
A Tiggo 7 collision or door-equipment list needs front, rear and side photographs, original market and production label.
Keep the complete body revision with the order
Pro, Pro Max and later petrol/hybrid revisions can change edges and mounting. Registration year or sales suffix alone cannot approve every panel and lamp in a mixed shipment.
Quote the main grille and covers separately
The large main grille can be a distinct assembly from the front bumper skin, with its own outline, finish and badge/sensor seats. Smaller grille strips, cover inserts and clips should remain clearly itemized parent contents. Retain exact fascia interfaces rather than treating every grille or lower trim as a universal body kit.
Identify lamp position and beam equipment
Headlamps need side, traffic-market beam, technology, socket and module contents. Rear corner and hatch sections have different positions. Independent fog lamps should be requested only when that specific function and bracket are fitted; a daytime-running or decorative front opening does not identify a fog assembly.
Keep door mechanisms related but independently identified
The shell, mirror, regulator, latch and handle need the same door/body record but different selection fields. Glass-carrier geometry, keyless wiring, camera and folding functions can change the contents. A bare shell quotation must not imply that these equipped mechanisms arrive automatically with the stamped panel.
Distinguish gas support from powered hatch equipment
Remote unlocking does not prove powered lifting. Gas supports and electric spindles follow the actual hatch configuration and side. Tailgate latches, rear wiper motors and cameras retain their own mounting and signal records rather than being chosen from side-door or front-windscreen mechanisms.
Agree finish and transport around the selected assembly
Large covers and panels need finish, carton dimensions and mounting protection identified before freight comparison. Sensors and cameras need their actual system, bracket and any calibration requirement retained. Small trims, seals and fixings belong with the identified parent so a consolidated shipment does not silently mix body revisions.
Connected selection questions
Compare headlights with the actual front bumper fascia.
Keep the fender lamp-edge and arch revision with the same front-body record.
Match the hood / bonnet panel and latch arrangement to the same build as the front bumper.
Quote the independently identified main front grille and any smaller trims separately.
Keep the main front grille outline with the accepted front bumper openings.
Add separate fog lights only when their actual function and brackets are fitted.
Assemblies to identify separately
| Assembly | Application | Selection record |
|---|---|---|
| Headlights | Actual front revision, side and beam market | Build, LHD/RHD beam, lamp technology, modules and sockets |
| Tail Lights | Exact rear body and lamp section | Side, outer/hatch section, function, socket and mounting |
| Fog Lights | Only a fitted independent fog-lamp function | Location, bumper revision, lamp type, socket and bracket |
| Front Bumper | Actual front cover and equipped fascia | Full front photo, build, grille/lamp/sensor openings and finish |
| Rear Bumper | Exact rear cover and installed equipment | Build, reflector/sensor openings, lower trim and mounting |
| Front Grille | Identified main grille and front-body revision | Outline, finish, upper/lower position, badge and equipment seats |
| Side Mirror | Exact door, side and steering market | Socket, folding/heating, camera/indicator and mounting base |
| Fender | Exact side and front-body revision | Lamp/bumper edges, arch profile, trim holes and finish |
| Hood / Bonnet | Identified bonnet panel and latch arrangement | Build, edge geometry, hinges, latch and insulation seats |
| Tailgate Shell | Actual rear hatch and equipment revision | Glass opening, lamp, hinge, latch and support interfaces |
| Door Shell | Exact front/rear door and side | Opening, hinges, latch, glass carrier and mirror interfaces |
| Window Regulator | Exact door/side and glass mechanism | Rail/cable geometry, carrier, motor and socket |
| Door Lock Actuator | Installed door latch and locking equipment | Door/side, cable ends, socket and keyless application |
| Door Handle | Exact exterior handle and equipment | Door/side, key cylinder, carrier, keyless socket and finish |
| Tailgate Lock Actuator | Identified rear latch and release equipment | Latch label, mounting, striker, socket and release |
| Tailgate Support / Lift Strut | Actual gas support or verified powered lift unit | Length, force/drive label, end fittings and hatch equipment |
| Front Wiper Motor & Linkage | Actual windscreen mechanism and steering market | Motor, pivot pattern, linkage, mounting and sweep |
| Rear Wiper Motor | Exact hatch glass and rear wipe equipment | Shaft, socket, mounting, sweep and washer arrangement |
| Washer Pump | Identified reservoir and front/rear wash circuit | Seat, grommet, outlet count, socket and function |
| Washer Reservoir | Actual front-body cavity and wash equipment | Bottle, filler path, pump seats, sensor and brackets |
| Fender Liner | Exact wheel corner and fascia revision | Side, arch form, openings, clips and material |
| Underbody Shield | Identified lower engine/body protection panel | Powertrain, panel profile, fasteners and service apertures |
| Parking Sensor | Actual ultrasonic bumper equipment | Position, marking, socket, bracket and orientation |
| Reversing Camera | Identified rear-view or surround-view video system | Housing, lens, socket, bracket and video identity |
Continue the order
Return to the Tiggo 7 grouped parts directory. For quantities and commercial fields, use parts-list quotation preparation rather than inferring price or stock from a reference number.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.