Nissan Sentra Radiator Wholesale

Engine, CVT cooler connections, core size and fan package vary by generation and trim.

For this radiator, keep chassis, production date, engine, transmission and sales market on the same record. The Sentra B13–B18 identification guide explains why a regional name alone is insufficient.

When this component is part of a mixed system order, use the fuel, cooling, electrical and a/c to separate neighboring assemblies.

Send overall and mounting or connection photographs. For the radiator, retain core dimensions and hose positions and oil-cooler and mount interfaces; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.

Give every linked assembly its own specification; approving the radiator does not confirm the surrounding parts.

Sentra Water Pump — Pump drive, impeller and housing must stay with the engine; a gasket outline is not sufficient identification. Confirm engine and coolant circuit and drive and impeller arrangement on its own order line.

Sentra Radiator Cooling Fan — Motor count, shroud, control module and connector must match the radiator/condenser stack. Confirm cooling layout and fan position and motor or mechanical drive on its own order line.

Sentra Oil Cooler — Confirm whether the unit serves engine oil or CVT fluid; similar cores cannot be exchanged across circuits. Confirm engine or CVT fluid circuit and coolant and oil port layout on its own order line.

Sentra Intercooler / Charge-Air Cooler — Restricted to the factory B17 1.6T charge-air system; radiator and condenser cores are different products. Confirm b17 1.6t charge-air system and core dimensions and outlet direction on its own order line.

Sentra Thermostat — Opening specification, housing and bypass layout must match the engine, not only the outer diameter. Confirm engine and temperature specification and bypass and seal arrangement on its own order line.

Sentra Radiator Support / Upper Tie Bar — Upper tie bar and full support assembly are different contents; mounting points must match lamps and cooling modules. Confirm generation and front-end revision and lamp, condenser and radiator mounting points on its own order line.

Before approving the radiator, agree sample and inspection requirements using the quality-control checklist. Return to the Sentra parts directory for other systems.

For radiator requirements on other vehicles, compare the radiator and cooling directory. Keep the Sentra specification and every other approved model on separate order lines.