What to quote
State the propeller shaft quantity, vehicle application and agreed assembly contents. Identify pieces per set and any separately priced hardware before comparing quotations.
Nissan X-Trail · Suspension, Steering & Mounting
Match the X-Trail propeller shaft to front or rear and wheelbase. Record flange pilot diameter and bolt pattern together with length and joint construction before sampling.

| Record | Details to retain |
|---|---|
| Front or rear and wheelbase | Identify front or rear and wheelbase from the vehicle, installed assembly or readable label. |
| Flange pilot diameter and bolt pattern | Show flange pilot diameter and bolt pattern in photographs and retain measurements that distinguish the interfaces. |
| Length and joint construction | Specify length and joint construction together with every piece required in the quoted assembly. |
Generation, side and 2WD, 4WD or e-4ORCE architecture can change the mounting geometry.
For this propeller shaft, keep T30/T31/T32/T33 generation, production date, engine or electrified powertrain, transmission and sales market on the same record. The X-Trail generation and market guide explains why a regional name alone is insufficient.
When this component is part of a mixed system order, use the brake, suspension & awd orders to separate neighboring assemblies.
Send overall and mounting or connection photographs. For the propeller shaft, retain flange pilot diameter and bolt pattern and length and joint construction; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.
Give every linked assembly its own specification; approving the propeller shaft does not confirm the surrounding parts.
X-Trail Transmission Mount — Manual and CVT housings use different support geometry even when the engine family is shared. Confirm gearbox and transfer-case code and crossmember and stud pattern on its own order line.
X-Trail Axle Shaft — Generation, side and 2WD, 4WD or e-4ORCE architecture can change the mounting geometry. Confirm rigid axle position and side and spline and flange arrangement on its own order line.
X-Trail Differential Bearing Kit — Generation, side and 2WD, 4WD or e-4ORCE architecture can change the mounting geometry. Confirm axle and differential code and pinion and carrier bearing references on its own order line.
X-Trail Clutch Kit — This page is for conventional manual gearboxes only; exclude CVT applications and identify turbocharged, diesel and hybrid variants separately. Confirm confirmed manual gearbox and engine and disc diameter and input spline on its own order line.
X-Trail CV Axle — Manual and CVT shafts can differ in length, splines and intermediate support; identify side and gearbox. Confirm axle, side and drivetrain and inner flange or spline on its own order line.
X-Trail Transfer Case Actuator — Generation, side and 2WD, 4WD or e-4ORCE architecture can change the mounting geometry. Confirm transfer case and actuator function and gear or shaft interface on its own order line.
State the propeller shaft quantity, vehicle application and agreed assembly contents. Identify pieces per set and any separately priced hardware before comparing quotations.
Support the shaft at multiple points and restrain sliding sections.
Before approving the propeller shaft, agree sample and inspection requirements using the quality-control checklist. Return to the X-Trail parts directory for other systems.
Bulk inquiry
We quote by vehicle model, OE number, part type, quantity and target market. Uploading a spreadsheet or ZIP package is optional.
Email: sales@popxa.com
Phone: +86 188 3743 1505
WhatsApp: +86 188 3743 1505
WeChat: +86 188 3743 1505
Address: Jinling Avenue, Yanling, Xuchang, Henan, China