Record generation, body width, wheelbase, roof/load version, axle, side and 2WD/4WD layout.
Suspension, Steering & Driveline
Toyota Hiace Center Support Bearing Wholesale Supplier
Propeller-shaft center bearing and rubber support for multi-piece driveline layouts. For quotation, confirm axle, side and position; also provide body, wheelbase and 2WD/4WD, quantity and packing.
Fitment boundary: Only applicable multi-piece shafts; wheelbase, shaft diameter, bearing size, bracket offset and installed orientation must match.
Product definition
Define the correct Hiace center support bearing before price.
Record the four fields below on the same inquiry line.
Axle, side and position
Support this with a label, measurement or photo where relevant.Body, wheelbase and 2WD/4WD
Support this with a label, measurement or photo where relevant.Mounting, spline or ratio
Support this with a label, measurement or photo where relevant.Chassis/OE/old-part evidence
Support this with a label, measurement or photo where relevant.
Support this with a label, measurement or photo where relevant.Body, wheelbase and 2WD/4WD
Support this with a label, measurement or photo where relevant.Mounting, spline or ratio
Support this with a label, measurement or photo where relevant.Chassis/OE/old-part evidence
Support this with a label, measurement or photo where relevant.
Center Support Bearing purchasing boundary
Review the installed center support bearing as its own specification.
Begin with axle, side and position, then verify body, wheelbase and 2WD/4WD and mounting, spline or ratio against the removed unit. Only applicable multi-piece shafts; wheelbase, shaft diameter, bearing size, bracket offset and installed orientation must match. Record unresolved interfaces beside the offered item code so sample approval and production use the same application.
Hiace generation and body check
Check center support bearing across H100, H200 and H300.
The Hiace name covers non-interchangeable commercial and passenger bodies. Use the exact chassis and installed component.
| Vehicle scope | Center Support Bearing confirmation |
|---|---|
| H100 | Confirm older LH/RZH/KZH chassis, engine, body, market and axle, side and position, body, wheelbase and 2WD/4WD, mounting, spline or ratio. |
| H200 | Confirm KDH/TRH/GDH/LH chassis, facelift, narrow/wide body, wheelbase, roof and axle, side and position, body, wheelbase and 2WD/4WD, mounting, spline or ratio. |
| H300 | Confirm engine, production month, cargo/passenger/Commuter body, installed equipment and axle, side and position, body, wheelbase and 2WD/4WD, mounting, spline or ratio. |
| Door and load version | Only applicable multi-piece shafts; wheelbase, shaft diameter, bearing size, bracket offset and installed orientation must match. |
Identification evidence
An OE number helps, but it is not mandatory.
Send the exact chassis/body record, installed position, old-part label, complete photos and decisive measurements. The product-type image never proves fitment.
Wrong-part prevention
Build a defensible center support bearing inquiry.
Compare mounts, tapers, bushings, splines, flanges, ratios, ABS provision and measured length.
Compare axle, side and position, body, wheelbase and 2WD/4WD, mounting, spline or ratio, chassis/OE/old-part evidence and attach the label, complete views and decisive measurements.
Protect threads, boots, machined faces and long shafts; support heavy assemblies inside the export carton. Approve the exact item and unresolved boundaries before production.
Related Hiace requirements
Complete the vehicle-specific parts list.
All Toyota Hiace PartsCompare all 92 parts by vehicle system.Toyota Hiace Fleet Brake, Suspension & Driveline Parts GuideResolve the relevant vehicle or system boundary.Hiace Propeller ShaftFront or rear propeller-shaft assembly for applicable Hiace driveline layouts.Hiace Front Differential AssemblyFront final-drive assembly for applicable four-wheel-drive Hiace versions.Hiace Shock AbsorberFront strut or rear damper by suspension specification.Hiace Coil SpringSuspension spring by axle, body weight and ride specification.
Buyer questions
Toyota Hiace Center Support Bearing FAQ.
Yes. Send H100, H200 or H300, chassis, body, engine, position, old-part photos and measurements. Only applicable multi-piece shafts; wheelbase, shaft diameter, bearing size, bracket offset and installed orientation must match.
Confirm axle, side and position, body, wheelbase and 2WD/4WD, mounting, spline or ratio, chassis/OE/old-part evidence. Keep unresolved differences visible before approval.
Yes. Put the center support bearing application, position, evidence file, quantity, grade and packing request on one traceable line.
Bulk inquiry
Send your OE list, model list or sample photos.
We quote by vehicle model, OE number, part type, quantity and target market. Uploading a spreadsheet or ZIP package is optional.
1Send OE list, model list or part photos
2Confirm fitment by OE number or sample
3Quote by quantity, packing and market
Sales contact
Email: sales@popxa.com
Phone: +86 188 3743 1505
WhatsApp: +86 188 3743 1505
WeChat: +86 188 3743 1505
Address: Jinling Avenue, Yanling, Xuchang, Henan, China
Common wholesale inquiry scope
- Toyota, Honda, Nissan, Hyundai, Kia, BYD and Chery replacement parts
- Brake pads, filters, lights, suspension, sensors and body parts
- Mixed OE orders, neutral packing and private label requests
Quote faster with these details
- Vehicle brand, model, model year and engine version
- OE No., replacement number, reference number or sample photo
- Target quantity, destination market and packing request
- Preferred product grade, private label or neutral packing