BYD Song Plus EV / DM-i SUV
BYD Song Plus Body, Lamps & Tailgate Parts Guide
A Song Plus collision-parts order needs front, rear and side photographs together with powertrain, build and original market.
Identify the actual body revision
Early and later fascia designs can use different lamps, covers and carriers. A model badge or registration year cannot approve every panel in a mixed body-parts list.
Keep lamp sections and functions separate
Headlights require side, traffic-market beam, connector and module contents. Rear lighting may contain corner and tailgate light-bar sections with different mounting and electrical records. Preserve these distinctions when requesting a pair or a full-width set rather than treating all red or clear lenses as one assembly.
Separate cover, reinforcement and carrier
A bumper skin is a cosmetic body cover; the collision beam and front cooling carrier have different interfaces and roles. Grille, sensor brackets and trim should be itemized with the identified cover. Professional structural assessment is necessary after collision damage; a painted outer panel does not resolve hidden mounting distortion.
Record door equipment together
Door shells, regulators, latches, handles and mirrors need exact side and equipment. Keyless wiring, mirror camera functions and glass-mounting geometry can change the order. Keep bare shell and complete equipped-door requests explicit, while small subcomponents remain tied to the parent assembly.
Treat the SUV tailgate as its own system
The rear hatch needs window, lamp-bar, latch, support and wiper interfaces. Distinguish gas support from powered spindle equipment and rear wiper motor from the front mechanism. A Seal sedan boot lid or support photograph is not evidence for the Song Plus SUV hatch.
Define finish and freight before consolidation
Large panels and bumper covers need finish, trim contents, mounting protection and carton dimensions agreed before freight comparison. Smaller lamps, cameras and sensors need lens or sensing-face protection. Keep the correct body record on every carton line so a consolidated shipment does not mix different revisions.
Connected selection questions
Confirm the front revision across the headlights and front bumper; their edge and mounting relationship with the fender matters before approving individual panels.
The hood / bonnet latch and lamp interfaces depend on the radiator support.
Keep that carrier distinct from the collision bumper reinforcement and its structural mounting record.
When ordering tail lights, specify corner or hatch sections.
Match the rear bumper revision and tailgate light-bar provisions before consolidating rear-body parts.
Assemblies to identify separately
| Assembly | Application | Selection record |
|---|---|---|
| Headlights | EV / DM-i; exact fascia, side and beam market | Side, facelift, LHD/RHD beam, connector and module contents |
| Tail Lights | EV / DM-i; corner, tailgate and body revision | Side, outer/inner/centre section, connector and lens design |
| Front Bumper | EV / DM-i; facelift and cooling-front-end specific | Upper/lower cover, openings, grille interfaces and sensor mounts |
| Rear Bumper | EV / DM-i; rear body and exhaust configuration | Upper/lower shell, reflector openings and parking-sensor positions |
| Side Mirror | EV / DM-i; side and steering market | Side, pin count, folding/heating, camera and indicator functions |
| Fender | EV / DM-i; side and body-front-end revision | Side, wheel-arch shape, lamp interface and mounting flange |
| Hood / Bonnet | EV / DM-i; identified front body revision | Contour, hinge locations, latch interface and insulation |
| Tailgate | EV / DM-i; SUV rear-body revision | Shell, rear-window opening, lamp locations, wiper and latch interfaces |
| Door Shell | EV / DM-i; exact door and body revision | Front/rear, side, window frame and handle/mirror mounting |
| Window Regulator | EV / DM-i; exact side door and HVAC/drive market | Door/side, cable or rail layout, glass mounts and motor socket |
| Door Lock Actuator | EV / DM-i; identified front/rear door | Door/side, latch jaw, cables, connector and locking functions |
| Door Handle | EV / DM-i; identified door and keyless equipment | Door/side, exterior carrier, cable interface and sensor wiring |
| Tailgate Lock Actuator | EV / DM-i; identified rear latch system | Latch marking, striker interface, socket and closing function |
| Tailgate Support / Lift Strut | EV / DM-i; gas-assisted or powered tailgate | Support type, side, stroke, mount ends and electrical connector |
| Front Wiper Motor & Linkage | EV / DM-i; identified windscreen drive | Drive side, pivot spacing, motor, linkage and socket |
| Rear Wiper Motor | EV / DM-i; fitted SUV tailgate wiper | Motor bracket, output spindle, connector and park position |
| Washer Pump | EV / DM-i; front/rear washer circuit | Reservoir fitting, outlet count, socket and flow routing |
| Washer Reservoir | EV / DM-i; front-body and washer equipment | Bottle profile, filler neck, pump seats and level-sensor provision |
| Fender Liner | EV / DM-i; exact wheel arch | Corner, arch profile, service openings and fastener pattern |
| Underbody Shield | EV / DM-i; identified non-structural splash panel | Panel location, outline, service apertures and mounting holes |
| Bumper Reinforcement | EV / DM-i; front or rear collision beam | Position, beam profile, crash-box interfaces and mounting datums |
| Radiator Support | EV / DM-i; exact front carrier and cooling pack | Lamp tabs, cooling mounts, latch interface and front-body datums |
| Charge Port Door / Cover | EV / DM-i; actual inlet location and market | AC/DC cover location, flap outline, hinge, latch and body finish |
| Parking Sensor | EV / DM-i; fitted ultrasonic parking equipment | Bumper position, sensor marking, connector and bracket |
| Reversing Camera | EV / DM-i; identified rear or surround-view system | Installed camera, housing, connector and video-system specification |
Continue the order
Return to the Song Plus grouped parts directory. For commercial fields, use the parts-list quotation guide rather than inferring a price or stock status from a reference number.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.