Chery Arrizo sedans • Numbered models and powertrains kept separate
Arrizo Sedan Body, Lighting & Trunk Equipment
Arrizo 3, 5, 6, 7 and 8 have their own sedan body records.
Photograph the front and rear revision
Pro naming and a facelift can change lamps, bumpers, grille and their surrounding brackets together. Keep full front/rear photographs and production information with each body order; a visually similar fascia cannot approve cross-model panel fitment.
Record lamp equipment and market approval
Identify halogen or LED construction, connector, mounting points and module contents. Headlamp beam pattern and LHD/RHD destination remain important, while tail-lamp sections may be body-mounted or trunk-mounted. A fog-lamp opening in a bumper is not proof that the matching lamp, wiring and bracket are present on every grade.
Specify bumper and grille contents separately
A bumper cover is not a crash beam, complete front end or structural reinforcement. Agree sensor openings, grille inserts, brackets and finish before quoting. Keep parking-sensor mounts and camera positions with the actual revision. Large covers, fenders and hoods need supported edges and accepted packing dimensions, not an assumed assembled-body package.
Distinguish the boot lid from an SUV hatch
Arrizo sedan trunk lids do not have the SUV tailgate window and rear-wiper assembly boundary. Identify hinges, latch, trim, camera and any trunk-mounted lamp interfaces. Check whether the actual support uses gas struts or spring-loaded hinges; a generic lift-support shape cannot establish the vehicle mechanism.
Retain door, mirror and window equipment
Record front/rear door, side, connector and glass-lift mechanism before comparing shells, handles, locks and regulators. Mirror heating, folding, camera and control functions vary by equipment. One-touch or anti-pinch window operation also needs its actual motor and controller interfaces; a basic regulator should not silently include those functions.
Keep visibility and protection components identifiable
Front wiper linkage, washer pump and bottle require their mounting, outlet and electrical details. Wheel liners and lower shields need the engine/body clearance and complete fixing outline. Parking sensors and reversing cameras retain their original signal and mounting information. Where equipment is absent or uncertain, keep it out of an assumed common sedan kit.
Connected assembly comparisons
Compare the headlights with the actual front revision and market beam pattern.
The front bumper cover and front grille must retain the same lamp, sensor and bracket openings; a Pro suffix alone cannot approve a mixed front-end set.
Record body-mounted and trunk-mounted sections for the tail lights.
Keep the rear bumper revision and sensor openings with the correct trunk lid / boot lid trim and lamp interfaces; these sedan boot panels are not SUV hatch assemblies.
Confirm the installed bracket and wiring before adding fog lights to a bumper request.
The parking sensor needs its original mounting and connector, while the reversing camera has a separate signal and camera position; an opening does not establish equipped hardware.
Assemblies to identify separately
| Assembly | Application boundary | Selection record |
|---|---|---|
| Headlights | Exact numbered Arrizo, installed equipment and assembly identity | Build, LHD/RHD beam, lamp technology, modules and sockets |
| Tail Lights | Exact numbered Arrizo, installed equipment and assembly identity | Side, outer/trunk-lid section, function, socket and mounting |
| Fog Lights | Exact numbered Arrizo, installed equipment and assembly identity | Location, bumper revision, lamp type, socket and bracket |
| Front Bumper | Exact numbered Arrizo, installed equipment and assembly identity | Full front photo, build, grille/lamp/sensor openings and finish |
| Rear Bumper | Exact numbered Arrizo, installed equipment and assembly identity | Build, reflector/sensor openings, lower trim and mounting |
| Front Grille | Exact numbered Arrizo, installed equipment and assembly identity | Outline, finish, upper/lower position, badge and equipment seats |
| Side Mirror | Exact numbered Arrizo, installed equipment and assembly identity | Socket, folding/heating, camera/indicator and mounting base |
| Fender | Exact numbered Arrizo, installed equipment and assembly identity | Lamp/bumper edges, arch profile, trim holes and finish |
| Hood / Bonnet | Exact numbered Arrizo, installed equipment and assembly identity | Build, edge geometry, hinges, latch and insulation seats |
| Trunk Lid / Boot Lid | Exact numbered Arrizo, installed equipment and assembly identity | Lid perimeter, hinges, latch, lamp/trim and camera interfaces |
| Door Shell | Exact numbered Arrizo, installed equipment and assembly identity | Opening, hinges, latch, glass carrier and mirror interfaces |
| Window Regulator | Exact numbered Arrizo, installed equipment and assembly identity | Rail/cable geometry, carrier, motor and socket |
| Door Lock Actuator | Exact numbered Arrizo, installed equipment and assembly identity | Door/side, cable ends, socket and keyless application |
| Door Handle | Exact numbered Arrizo, installed equipment and assembly identity | Door/side, key cylinder, carrier, keyless socket and finish |
| Trunk Lock Actuator | Exact numbered Arrizo, installed equipment and assembly identity | Boot-lid latch, striker, release cable/socket and mounting |
| Trunk Support / Gas Strut | Exact numbered Arrizo, installed equipment and assembly identity | Actual support type, length, force and end fittings |
| Front Wiper Motor & Linkage | Exact numbered Arrizo, installed equipment and assembly identity | Motor, pivot pattern, linkage, mounting and sweep |
| Washer Pump | Exact numbered Arrizo, installed equipment and assembly identity | Seat, grommet, outlet count, socket and function |
| Washer Reservoir | Exact numbered Arrizo, installed equipment and assembly identity | Bottle, filler path, pump seats, sensor and brackets |
| Fender Liner | Exact numbered Arrizo, installed equipment and assembly identity | Side, arch form, openings, clips and material |
| Underbody Shield | Exact numbered Arrizo, installed equipment and assembly identity | Powertrain, panel profile, fasteners and service apertures |
| Parking Sensor | Exact numbered Arrizo, installed equipment and assembly identity | Position, marking, socket, bracket and orientation |
| Reversing Camera | Exact numbered Arrizo, installed equipment and assembly identity | Housing, lens, socket, bracket and video identity |
Continue the accepted parts list
Keep the full numbered vehicle and component record with the Arrizo grouped parts directory. The parts-list quotation guide covers quantity, destination and commercial fields without inferring price or stock.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.