Hyundai Accent Front Subframe / Crossmember Wholesale

A subframe must match control-arm, rack and powertrain mounting points; cosmetic similarity is not enough.

For this component, keep X3/LC/MC/RB/RC/HC/YC/BN7 generation, sedan or hatchback body, production date, engine, transmission and sales market on the same record. The Accent, Verna and Solaris market guide explains why a regional name alone is insufficient.

When this component is part of a mixed system order, use the brake, suspension & steering to separate neighboring assemblies.

Send overall and mounting or connection photographs. For the front subframe / crossmember, retain steering-rack and control-arm mounts and bare frame or bush and bracket contents; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.

Give every linked assembly its own specification; approving the front subframe / crossmember does not confirm the surrounding parts.

Accent Control Arm — Bare arms and complete arms with bushings or ball joints must be quoted as different supply boundaries. Confirm independent-suspension position and side and mounting geometry on its own order line.

Accent Steering Rack — LHD and RHD racks and electric versus hydraulic systems are not interchangeable by housing length. Confirm LHD/RHD and assist system and mounting, input shaft and ratio on its own order line.

Accent Engine Mount — Position and bracket geometry matter; a transmission-side support is not an engine-mount substitute. Confirm engine code and mount position and bracket and stud pattern on its own order line.

Accent Transmission Mount — Manual, automatic and DCT housings use different support geometry even when the engine family is shared. Confirm gearbox and transfer-case code and crossmember and stud pattern on its own order line.

Accent Shock Absorber — Front struts and rear dampers are separate assemblies; generation, body and regional suspension packages can change valving and mounts. Confirm front strut or rear damper position and generation, trim and suspension package on its own order line.

Accent Strut Mount — A rubber mount and a bearing-equipped top mount are different contents; confirm the actual front-strut design. Confirm front strut design and side and stud pattern and bearing format on its own order line.

Before approving the front subframe / crossmember, agree sample and inspection requirements using the quality-control checklist. Return to the Accent parts directory for other systems.

For front subframe / crossmember requirements on other vehicles, compare the suspension and steering directory. Keep the Accent specification and every other approved model on separate order lines.