Hyundai Elantra procurement guide
Hyundai Elantra Petrol, Diesel, Turbo, Hybrid and N Parts Guide
Keep standard, electrified and performance powertrains from being merged under one Elantra name.

Name the complete powertrain
Record engine code, fuel type, induction and transmission. On CN7, state Hybrid, N Line or N explicitly rather than using trim photographs alone.
Separate ignition and emissions hardware
Spark plugs and coils belong to petrol applications; glow plugs, DPF and diesel EGR hardware require a confirmed diesel engine and market.
Do not infer electrified or performance components
A conventional starter, alternator, belt drive or A/C compressor is not automatically shared with Hybrid vehicles; N and N Line labels also do not prove the same brakes, dampers or cooling parts.
Filters, Ignition & Transmission Service
Build service packs from the installed engine and transmission. Manual, automatic, DCT and electrified service requirements stay separate.
| Component | Selection boundary |
|---|---|
Specify Elantra air filter by engine and airbox family. Retain element outline and dimensions and seal profile and housing depth so offers describe the same assembly. | |
Build an Elantra cabin air filter inquiry around hvac case and market, then compare single or paired element and tray size and media. | |
Match the Elantra oil filter to engine code and filter count. Record thread and gasket dimensions together with full-flow or bypass role before sampling. | |
For Elantra fuel filter, start with fuel and injection system; use filter head and sensor and port and seal arrangement to separate similar variants. | |
Specify Elantra transmission filter by manual, automatic or dct code. Retain internal strainer neck and pickup position and pan gasket and seal contents so offers describe the same assembly. | |
Build an Elantra spark plugs inquiry around petrol engine and induction type, then compare thread, reach and heat specification and electrode design and set quantity. | |
Match the Elantra glow plugs to diesel engine and controller. Record rated voltage and tip reach together with terminal and thread before sampling. | |
For Elantra ignition coil, start with petrol engine and ignition layout; use connector and boot depth and per-cylinder or shared unit to separate similar variants. | |
Specify Elantra drive belt by engine and accessories. Retain belt marking and rib count and length and quantity so offers describe the same assembly. | |
Build an Elantra belt tensioner inquiry around engine and tensioning type, then compare pulley diameter and offset and bracket and assembly contents. | |
Match the Elantra clutch kit to manual gearbox and engine. Record disc diameter and input spline together with release bearing and cover contents before sampling. |
Engine, Fuel, Cooling, Electrical & A/C
Separate petrol, diesel, turbo, hybrid and performance systems by exact generation, engine and market record.
| Component | Selection boundary |
|---|---|
For Elantra oxygen sensor, start with engine and emission market; use bank and upstream or downstream position and sensor type, connector and lead to separate similar variants. | |
Specify Elantra mass air flow sensor by engine and air-cleaner housing. Retain sensor-only or housing assembly and connector and calibration family so offers describe the same assembly. | |
Build an Elantra map / boost pressure sensor inquiry around engine and intake pressure location, then compare mounting and pressure port and connector and measuring range. | |
Match the Elantra crankshaft position sensor to engine and trigger arrangement. Record mounting depth and flange together with connector and lead route before sampling. | |
For Elantra camshaft position sensor, start with engine, bank and sensor position; use inserted length and flange and connector and original label to separate similar variants. | |
Specify Elantra fuel pump / supply module by engine and in-tank module type. Retain pump, sender and strainer contents and outlet, connector and tank flange so offers describe the same assembly. | |
Build an Elantra high-pressure fuel pump inquiry around direct-injection petrol application, then compare cam drive and mounting flange and pressure ports and control connector. | |
Match the Elantra fuel injector to port or direct-injection engine. Record injector label and rail interface together with nozzle, connector and seal set before sampling. | |
For Elantra throttle body, start with engine and control function; use bore, mounting and pipe layout and actuator and connector to separate similar variants. | |
Specify Elantra turbocharger by turbocharged petrol or diesel engine. Retain turbo label, flanges and ports and wastegate actuator and manifold scope so offers describe the same assembly. | |
Build an Elantra intercooler / charge-air cooler inquiry around turbocharged charge-air system, then compare core dimensions and outlet direction and mounts, ducts and sensor openings. | |
Match the Elantra egr valve to engine and emission-system revision. Record valve, cooler and pipe relationship together with connector and mounting interface before sampling. | |
For Elantra diesel particulate filter, start with diesel engine and emissions market; use canister label, sensor ports and pipe geometry and bare filter or catalyst and sensor contents to separate similar variants. | |
Specify Elantra vacuum pump by engine and vacuum source. Retain drive and lubrication interface and mounting and vacuum outlet so offers describe the same assembly. | |
Build an Elantra vapor canister purge valve inquiry around engine and emission market, then compare valve location and hose ports and connector and flow direction. | |
Match the Elantra water pump to engine and coolant circuit. Record drive and impeller arrangement together with housing and seal geometry before sampling. | |
For Elantra radiator, start with engine, transmission and cooling package; use core dimensions and hose positions and oil-cooler and mount interfaces to separate similar variants. | |
Specify Elantra thermostat by engine and temperature specification. Retain bypass and seal arrangement and insert or housing supply so offers describe the same assembly. | |
Build an Elantra radiator cooling fan inquiry around cooling layout and fan position, then compare motor or mechanical drive and blade, shroud and controller contents. | |
Match the Elantra alternator to engine and charging specification. Record output, connector and regulation together with pulley and mounting geometry before sampling. | |
For Elantra starter motor, start with engine, gearbox and voltage; use pinion and mounting flange and rotation and solenoid terminals to separate similar variants. | |
Specify Elantra a/c compressor by refrigerant and compressor reference. Retain drive, control and connector and mounting and refrigerant ports so offers describe the same assembly. | |
Build an Elantra a/c condenser inquiry around front cooling package, then compare core, mounts and refrigerant fittings and receiver-drier inclusion. | |
Match the Elantra a/c evaporator to front or rear hvac position. Record core and pipe geometry together with valve and sensor interfaces before sampling. | |
For Elantra blower motor, start with front or rear hvac and drive side; use wheel dimensions and rotation and connector and controller contents to separate similar variants. | |
Specify Elantra timing chain kit by engine and timing architecture. Retain chain, guide and tensioner references and primary and secondary chains and sprockets included so offers describe the same assembly. | |
Build an Elantra oil cooler inquiry around engine or cvt fluid circuit, then compare coolant and oil port layout and core or housing assembly contents. |
Continue with the same vehicle details
Use the Elantra parts directory to identify other assemblies. Once specifications are clear, retain quantities, packing and destination through the shipping and quotation guide.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.