Hyundai Elantra procurement guide
Hyundai Elantra Body, Lighting and Collision Parts Guide
Use full-vehicle photographs and define bare-versus-equipped contents before comparing collision quotations.
Photograph the whole vehicle
Front, rear and side views reveal sedan, hatchback or coupe body, facelift, trim and adjacent-part interfaces.
Name every opening and function
Record lamp technology, side, beam market, camera, radar, parking sensors, fog lamps, mirror functions and keyless equipment.
Plan volumetric packing
Brace hoods and trunk lids, suspend lamp lenses and avoid folding bumper covers or thin fender liners.
Body, Collision, Lighting & Doors
Use full front, rear and side photographs with build date, body style, trim and lamp technology for sedan panels and mechanisms.
| Component | Selection boundary |
|---|---|
Match the Elantra headlights to generation, facelift, trim and side. Record halogen or led equipment and beam market together with connector, module and bracket contents before sampling. | |
For Elantra tail lights, start with generation, body style, facelift and side; use outer quarter panel or trunk-lid section and lamp technology, connector and tabs to separate similar variants. | |
Specify Elantra fog lights by bumper revision and trim. Retain side and bracket geometry and lamp, bulb and bezel contents so offers describe the same assembly. | |
Build an Elantra daytime running lights inquiry around generation, facelift, trim and side, then compare lamp shape, connector and control module and bare module or bezel and bracket contents. | |
Match the Elantra front bumper to generation, facelift and trim. Record fog, sensor, grille and tow-eye openings together with cover, reinforcement and bracket scope before sampling. | |
For Elantra rear bumper, start with generation, facelift and trim; use reflector and sensor openings and cover, absorber and reinforcement scope to separate similar variants. | |
Specify Elantra front grille by grille position and facelift. Retain camera, emblem and sensing provisions and finish, clips and surround scope so offers describe the same assembly. | |
Build an Elantra side mirror inquiry around side, steering market and door, then compare heating, folding, indicator and camera functions and connector pins, finish and supplied glass. | |
Match the Elantra front fender to side, series and facelift. Record flare, marker and trim holes together with flange geometry and finish before sampling. | |
For Elantra hood panel, start with series and front-end revision; use hinge, latch and washer interfaces and panel finish and hardware scope to separate similar variants. | |
Specify Elantra trunk lid by generation, body style, facelift and spoiler. Retain hinge, latch, camera and lamp interfaces and bare panel or fitted hardware contents so offers describe the same assembly. | |
Build an Elantra window regulator inquiry around door and side, then compare motor inclusion and connector and rail geometry and glass attachment. | |
Match the Elantra door lock actuator / latch to door or trunk-latch location and side. Record latch, cable and rod interfaces together with connector and locking functions before sampling. | |
For Elantra wiper motor & linkage, start with generation and steering side; use spindle spacing and sweep geometry and motor, linkage and connector contents to separate similar variants. | |
Specify Elantra radiator support / upper tie bar by generation and front-end revision. Retain lamp, condenser and radiator mounting points and upper tie bar or wider support assembly so offers describe the same assembly. | |
Build an Elantra fender liner / splash shield inquiry around generation, side and wheel opening, then compare bumper and under-cover interfaces and fastener points and supplied clips. | |
Match the Elantra engine oil pan to engine and lower crankcase design. Record sump depth, bolt pattern and drain position together with gasket, plug and sensor contents before sampling. | |
For Elantra valve cover, start with engine and cylinder-head layout; use breather ports, coil wells and bolt pattern and gasket, seals and valve contents to separate similar variants. |
Continue with the same vehicle details
Use the Elantra parts directory to identify other assemblies. Once specifications are clear, retain quantities, packing and destination through the shipping and quotation guide.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.