Nissan Sunny Control Arm Wholesale

Bare arms and complete arms with bushings or ball joints must be quoted as different supply boundaries.

For this control arm, keep full chassis, body, production date, engine, transmission and sales market on the same record. The Sunny chassis and market guide explains why a regional name alone is insufficient.

When this component is part of a mixed system order, use the brake and chassis orders to separate neighboring assemblies.

Send overall and mounting or connection photographs. For the control arm, retain side and mounting geometry and bush and joint inclusion; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.

Give every linked assembly its own specification; approving the control arm does not confirm the surrounding parts.

Sunny Ball Joint — Pressed and bolted joints are not interchangeable even if the stud taper appears similar. Check axle, upper/lower position and side; record taper and retention method on its own order line.

Sunny CV Axle — Manual and CVT shafts can differ in length, splines and intermediate support; identify side and gearbox. Check axle, side and drivetrain; record inner flange or spline on its own order line.

Sunny Shock Absorber — Front struts and rear dampers are separate assemblies; trim and performance suspension can change valving and mounts. Check front strut or rear damper position; record generation, trim and suspension package on its own order line.

Sunny Stabilizer Link — Center length alone does not confirm stud angle or suspension clearance. Check axle and roll-control layout; record link centers and end type on its own order line.

Sunny Front Subframe / Crossmember — A subframe must match control-arm, rack and powertrain mounting points; cosmetic similarity is not enough. Check generation and drivetrain; record steering-rack and control-arm mounts on its own order line.

Before approving the control arm, agree sample and inspection requirements using the quality-control checklist. Return to the Sunny parts directory for other systems.

For control arm requirements on other vehicles, compare the suspension and steering directory. Keep the Sunny specification and every other approved model on separate order lines.