Nissan Sunny CV Axle Wholesale

Manual and CVT shafts can differ in length, splines and intermediate support; identify side and gearbox.

For this CV axle, keep full chassis, body, production date, engine, transmission and sales market on the same record. The Sunny chassis and market guide explains why a regional name alone is insufficient.

When this component is part of a mixed system order, use the brake and chassis orders to separate neighboring assemblies.

Send overall and mounting or connection photographs. For the CV axle, retain inner flange or spline and compressed length and outer spline; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.

Give every linked assembly its own specification; approving the CV axle does not confirm the surrounding parts.

Sunny Wheel Hub / Bearing — Pressed bearings and bolt-on hubs, plus encoder orientation, must not be merged under one wheel pattern. Check axle and hub or pressed-bearing format; record ABS encoder and wheel studs on its own order line.

Sunny Control Arm — Bare arms and complete arms with bushings or ball joints must be quoted as different supply boundaries. Check independent-suspension position; record side and mounting geometry on its own order line.

Sunny Coil Spring — Similar free height does not establish spring rate or end-seat geometry for another trim. Check axle, trim and body load; record free height, wire and end shape on its own order line.

Sunny Ball Joint — Pressed and bolted joints are not interchangeable even if the stud taper appears similar. Check axle, upper/lower position and side; record taper and retention method on its own order line.

Before approving the CV axle, agree sample and inspection requirements using the quality-control checklist. Return to the Sunny parts directory for other systems.

For CV axle requirements on other vehicles, compare the wheel hub and bearing directory. Keep the Sunny specification and every other approved model on separate order lines.