Nissan X-Trail procurement guide
Nissan X-Trail Powertrain Parts Guide
Prevent incompatible powertrain parts from being combined under one model name.
Name the complete powertrain
Send engine code, fuel type, induction system, transmission and drivetrain. For T33 state VC-Turbo, e-POWER 2WD or e-4ORCE.
Separate service architecture
Diesel glow plugs, petrol spark plugs, CVT filters and electrified cooling components each require a confirmed system.
Do not infer electrical components
A conventional alternator or starter is not automatically present on e-POWER because its petrol engine serves as a generator.
Filters, Ignition & Transmission Service
Build service packs from the installed engine and transmission. Conventional manual, automatic and Xtronic CVT requirements stay separate.
| Component | Selection boundary |
|---|---|
Specify X-Trail air filter by engine and airbox family. Retain element outline and dimensions and seal profile and housing depth so offers describe the same assembly. | |
Build an X-Trail cabin air filter inquiry around hvac case and market, then compare single or paired element and tray size and media. | |
Match the X-Trail oil filter to engine code and filter count. Record thread and gasket dimensions together with full-flow or bypass role before sampling. | |
For X-Trail fuel filter, start with fuel and injection system; use filter head and sensor and port and seal arrangement to separate similar variants. | |
Specify X-Trail transmission filter by manual, automatic or xtronic cvt code. Retain internal strainer neck and pickup position and pan gasket and seal contents so offers describe the same assembly. | |
Build an X-Trail spark plugs inquiry around petrol engine and induction type, then compare thread, reach and heat specification and electrode design and set quantity. | |
Match the X-Trail glow plugs to diesel engine and controller. Record rated voltage and tip reach together with terminal and thread before sampling. | |
For X-Trail ignition coil, start with petrol engine and ignition layout; use connector and boot depth and per-cylinder or shared unit to separate similar variants. | |
Specify X-Trail drive belt by engine and accessories. Retain belt marking and rib count and length and quantity so offers describe the same assembly. | |
Build an X-Trail belt tensioner inquiry around engine and tensioning type, then compare pulley diameter and offset and bracket and assembly contents. | |
Match the X-Trail clutch kit to confirmed manual gearbox and engine. Record disc diameter and input spline together with release bearing and cover contents before sampling. |
Engine, Fuel, Cooling, Electrical & A/C
Separate petrol, diesel, hybrid and e-POWER systems by exact generation, engine and market record.
| Component | Selection boundary |
|---|---|
Match the X-Trail oxygen sensor to engine and emission market. Record bank and upstream or downstream position together with sensor type, connector and lead before sampling. | |
For X-Trail mass air flow sensor, start with engine and air-cleaner housing; use sensor-only or housing assembly and connector and calibration family to separate similar variants. | |
Specify X-Trail map / boost pressure sensor by engine and intake pressure location. Retain mounting and pressure port and connector and measuring range so offers describe the same assembly. | |
Build an X-Trail crankshaft position sensor inquiry around engine and trigger arrangement, then compare mounting depth and flange and connector and lead route. | |
Match the X-Trail camshaft position sensor to engine, bank and sensor position. Record inserted length and flange together with connector and original label before sampling. | |
For X-Trail fuel pump / supply module, start with engine and in-tank module type; use pump, sender and strainer contents and outlet, connector and tank flange to separate similar variants. | |
Specify X-Trail high-pressure fuel pump by proven direct-injection petrol application. Retain cam drive and mounting flange and pressure ports and control connector so offers describe the same assembly. | |
Build an X-Trail fuel injector inquiry around port or direct-injection engine, then compare injector label and rail interface and nozzle, connector and seal set. | |
Match the X-Trail throttle body to engine and control function. Record bore, mounting and pipe layout together with actuator and connector before sampling. | |
For X-Trail turbocharger, start with confirmed turbocharged petrol or diesel engine; use turbo label, flanges and ports and wastegate actuator and manifold scope to separate similar variants. | |
Specify X-Trail intercooler / charge-air cooler by confirmed turbocharged charge-air system. Retain core dimensions and outlet direction and mounts, ducts and sensor openings so offers describe the same assembly. | |
Build an X-Trail egr valve inquiry around engine and emission-system revision, then compare valve, cooler and pipe relationship and connector and mounting interface. | |
Match the X-Trail vacuum pump to engine and vacuum source. Record drive and lubrication interface together with mounting and vacuum outlet before sampling. | |
For X-Trail water pump, start with engine and coolant circuit; use drive and impeller arrangement and housing and seal geometry to separate similar variants. | |
Specify X-Trail radiator by engine, transmission and cooling package. Retain core dimensions and hose positions and oil-cooler and mount interfaces so offers describe the same assembly. | |
Build an X-Trail thermostat inquiry around engine and temperature specification, then compare bypass and seal arrangement and insert or housing supply. | |
Match the X-Trail radiator cooling fan to cooling layout and fan position. Record motor or mechanical drive together with blade, shroud and controller contents before sampling. | |
For X-Trail alternator, start with engine and charging specification; use output, connector and regulation and pulley and mounting geometry to separate similar variants. | |
Specify X-Trail starter motor by engine, gearbox and voltage. Retain pinion and mounting flange and rotation and solenoid terminals so offers describe the same assembly. | |
Build an X-Trail a/c compressor inquiry around refrigerant and compressor reference, then compare drive, control and connector and mounting and refrigerant ports. | |
Match the X-Trail a/c condenser to front cooling package. Record core, mounts and refrigerant fittings together with receiver-drier inclusion before sampling. | |
For X-Trail a/c evaporator, start with front or rear hvac position; use core and pipe geometry and valve and sensor interfaces to separate similar variants. | |
Specify X-Trail blower motor by front or rear hvac and drive side. Retain wheel dimensions and rotation and connector and controller contents so offers describe the same assembly. | |
Build an X-Trail timing chain kit inquiry around engine and timing architecture, then compare chain, guide and tensioner references and primary and secondary chains and sprockets included. |
Continue with the same vehicle details
Use the X-Trail parts directory to identify other assemblies. Once specifications are clear, retain quantities, packing and destination through the shipping and quotation guide.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.