Hyundai Accent Sway Bar Bushing Wholesale

Front and rear bar bushes can share an outline while using different inner diameters, brackets and molded lips.

For this component, keep X3/LC/MC/RB/RC/HC/YC/BN7 generation, sedan or hatchback body, production date, engine, transmission and sales market on the same record. The Accent, Verna and Solaris market guide explains why a regional name alone is insufficient.

When this component is part of a mixed system order, use the brake, suspension & steering to separate neighboring assemblies.

Send overall and mounting or connection photographs. For the sway bar bushing, retain bar diameter and bracket profile and bushing split, material and supplied pieces; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.

Give every linked assembly its own specification; approving the sway bar bushing does not confirm the surrounding parts.

Accent Stabilizer Link — Center length alone does not confirm stud angle or suspension clearance. Confirm axle and roll-control layout and link centers and end type on its own order line.

Accent Control Arm — Bare arms and complete arms with bushings or ball joints must be quoted as different supply boundaries. Confirm independent-suspension position and side and mounting geometry on its own order line.

Accent Front Subframe / Crossmember — A subframe must match control-arm, rack and powertrain mounting points; cosmetic similarity is not enough. Confirm generation and drivetrain and steering-rack and control-arm mounts on its own order line.

Accent Tie Rod End — Inner and outer joints, handed threads and steering-rack versions require separate identification. Confirm steering system and position and thread size and handedness on its own order line.

Accent Wheel Hub / Bearing — Pressed bearings and bolt-on hubs, plus encoder orientation, must not be merged under one wheel pattern. Confirm axle and hub or pressed-bearing format and ABS encoder and wheel studs on its own order line.

Accent CV Axle — Manual, automatic, CVT/IVT and DCT shafts can differ in length, splines and intermediate support; identify side, drivetrain and gearbox. Confirm axle, side and drivetrain and inner flange or spline on its own order line.

Before approving the sway bar bushing, agree sample and inspection requirements using the quality-control checklist. Return to the Accent parts directory for other systems.

For sway bar bushing requirements on other vehicles, compare the suspension and steering directory. Keep the Accent specification and every other approved model on separate order lines.