Hyundai Tucson Wheel Hub / Bearing Wholesale

Pressed bearings and bolt-on hubs, plus encoder orientation, must not be merged under one wheel pattern.

For this wheel hub / bearing, keep JM/LM/TL/NX4 generation, production date, engine or electrified powertrain, transmission and sales market on the same record. The Tucson generation and market guide explains why a regional name alone is insufficient.

When this component is part of a mixed system order, use the brake, suspension, steering & awd to separate neighboring assemblies.

Send overall and mounting or connection photographs. For the wheel hub / bearing, retain ABS encoder and wheel studs and spline, flange and mounting dimensions; mark unknown values instead of borrowing a number from another generation. Use the OE and vehicle-identification checklist to organize the evidence.

Give every linked assembly its own specification; approving the wheel hub / bearing does not confirm the surrounding parts.

Tucson ABS Wheel Speed Sensor — Wheel position and encoder type matter beyond connector pin count; keep the harness route with the request. Confirm axle and sensor position and tone ring or encoder type on its own order line.

Tucson Brake Discs — Bolt pattern alone cannot confirm rotor offset, thickness or caliper clearance. Confirm front or rear disc package and diameter, thickness and overall height on its own order line.

Tucson Tie Rod End — Inner and outer joints, handed threads and steering-rack versions require separate identification. Confirm steering system and position and thread size and handedness on its own order line.

Tucson Stabilizer Link — Center length alone does not confirm stud angle or suspension clearance. Confirm axle and roll-control layout and link centers and end type on its own order line.

Tucson CV Axle — Manual, automatic and DCT shafts can differ in length, splines and intermediate support; identify side, drivetrain and gearbox. Confirm axle, side and drivetrain and inner flange or spline on its own order line.

Tucson Steering Rack — LHD and RHD racks and electric versus hydraulic systems are not interchangeable by housing length. Confirm LHD/RHD and assist system and mounting, input shaft and ratio on its own order line.

Before approving the wheel hub / bearing, agree sample and inspection requirements using the quality-control checklist. Return to the Tucson parts directory for other systems.

For wheel hub / bearing requirements on other vehicles, compare the wheel hub and bearing directory. Keep the Tucson specification and every other approved model on separate order lines.