Nissan Patrol purchasing guide
Nissan Patrol Maintenance & Service Parts Guide
Organize repeat-order service packs by engine and transmission instead of combining every Patrol service item into one kit.
Build the filter pack from the installed housings
Record the engine airbox, fuel-filter head and oil-filter positions. Some older diesel service lists contain more than one oil-filter role, so identifying one canister is not enough. Keep full-flow and bypass positions distinct. Cabin filters also require a check of the HVAC case and single or paired element arrangement.
Separate ignition from diesel starting aids
Petrol spark plugs require the specified reach, seat and heat characteristics. Diesel glow plugs require the correct control voltage and heating-tip geometry. For coils, establish whether the engine uses individual coil-on-plug units or an earlier ignition layout before setting quantities.
Identify the gearbox and the drive being serviced
A transmission strainer request needs the exact automatic gearbox and seal contents. A manual clutch kit needs disc spline, cover and release arrangement. Accessory belts are not timing belts; determine whether the engine timing uses belt, chain or another arrangement before selecting a kit.
Make repeat orders reproducible
Use a line for each confirmed application and unit of sale. Keep the accepted filter markings, kit contents and component photos with the order. Specify pieces per set and carton rather than assuming that two suppliers mean the same thing by a service pack.
Filters, Ignition & Service Kits
| Component | Purchasing distinction |
|---|---|
Identify the installed air cleaner before choosing a round or panel element. Y60/Y61 diesel housings and later petrol intake systems need different filter outlines. Confirm engine and airbox; element outline and dimensions; end seal and airflow direction. | |
Check whether the HVAC case has a serviceable cabin-filter slot and whether it takes one element or a paired set. Earlier equipment may differ from later Patrol climate systems. Confirm HVAC case and market; single or paired element; tray size and media. | |
Use the exact engine and lubrication layout to distinguish filter count, spin-on interface and any bypass element. Older diesel and later petrol engines require separate service lists. Confirm engine code and filter count; thread and gasket dimensions; full-flow or bypass role. | |
Separate older diesel filtration from common-rail water-separator arrangements and petrol tank-module filtration. Identify the filter head and water-sensor connection. Confirm fuel and injection system; filter head and sensor; port and seal arrangement. | |
Identify the automatic gearbox code and whether the quotation covers a pan strainer, external filter and seals. Manual gearboxes do not use the same service kit. Confirm gearbox code; filter location and neck; pan gasket and seal contents. | |
Select plugs by the petrol engine specification, ignition arrangement, reach and seat. Keep earlier inline-six, Y62 petrol and Y63 V6 applications separate. Confirm petrol engine code; thread, reach and seat; heat specification and quantity. | |
Identify the diesel engine and glow-control system before specifying voltage, tip length and connector. Cold-start equipment is engine-specific rather than common to all Patrol diesels. Confirm diesel engine and controller; rated voltage and tip reach; terminal and thread. | |
Distinguish individual coil-on-plug units from earlier distributor-related ignition equipment. Confirm petrol engine, connection and boot depth before pricing a cylinder set. Confirm petrol engine and ignition layout; connector and boot depth; per-cylinder or shared unit. | |
Record the actual accessory layout and belt marking. V-belt and multi-rib arrangements, air conditioning and alternator configuration change the required belt set. Confirm engine and accessories; belt marking and rib count; length and quantity. | |
Compare automatic tensioner or adjustable idler arrangements by engine, bracket, pulley offset and belt path. State whether the request is a pulley or complete tensioner. Confirm engine and tensioning type; pulley diameter and offset; bracket and assembly contents. | |
For manual Patrol applications, specify the engine and gearbox together with disc spline, cover and release arrangement. State bearing and hydraulic component inclusion separately. Confirm manual gearbox and engine; disc diameter and spline; cover and release contents. | |
Request a toothed timing-belt kit only for an engine confirmed to use that timing drive. List tensioner, idlers and any separately quoted cooling components. Confirm engine timing-drive type; belt pitch, width and tooth count; tensioner and idler contents. |
Continue with the same vehicle record
Return to the Patrol parts directory for other systems. Once the component requirements are clear, prepare the quantities, packing and destination details for a comparable quotation.
Auto parts inquiry
Send the vehicle and part evidence.
Include brand, full model, year, engine or EV drivetrain, OE/material code, quantity, destination and packing request. You can attach a list or old-part photos.